| Manufacturer Warranty
|
To be free from manufacturing defects
|
Model number: 10026Q
Internet number (SKU): 100133565
Price: $2
Brand:
Availability: in stock
Similar products
Description
1/8 in. Original Job-Tough Tombstone-Style Tile Spacers (250- Pack) - Product information
The QEP 1/8 in. Tile Spacers keep grout lines the same width and help to line up tiles at the corners when installing ceramic floor or wall tiles. The spacers are made from flexible PVC for ease in placing and adjusting tiles.
- Works with all sizes of ceramic tile, porcelain, stone and marble
- Evenly space and help align wall or floor tiles
- Makes uniform grout lines
- Flexible PVC
- Provides quick, professional-looking results
- Original job-tough tombstone style
Product reviews
Rated 5 out of
5
by
Barry from
worked well as spacers...
worked well as spacers
Date published: 2018-07-10
Rated 4 out of
5
by
MichaelTMWTX from
Work good...Work good
Date published: 2018-06-19
Rated 2 out of
5
by
Dman from
Soft material allows for inconsistant spacingI will not use these to install my tile floor unless absolutely necessary. (If I can't find harder ones) While dry fitting and spacing my tiles, I happened to notice that these spacers will "squish" and can be compressed. I am not sure, but they may be designed that way for ease of removal, but the problem remains, namely that you may get inconsistent spacing between your tiles, especially with larger 12x12 tiles that need to be "slid" into place. They also seem to be a little short for thicker 1/4" tiles. If your tiles are pillow topped (slightly rounded edges) they tend to fall over easier and need to stood back up. These things are fair at best. If you've never tiled before, I agree with the other reviewer. You should buy something else. The last thing you need is crooked grout lines. That would look terrible. Wouldn't it be better if you could tell everyone.... "Yes I did the tile myself !!!" and be proud of it?
Date published: 2015-10-21
Rated 3 out of
5
by
DIYRoy from
Difficult product to use.1/8 in. spacing turned out too close, and hard to keep the tiles in line. The soft plastic spaced at times woul give under compression ant throught the 1/8 in. spacing out of allignment. This is not an easy product for good result for novices. It probably works great for pros. The 3/16 in. product yielded much more a satisfing results, and was easier to use.
Date published: 2012-02-01
Rated 1 out of
5
by
EdBsaline from
Bag should say "an assortment of spacers". I spent hours laying out my tiles and it just did no...Bag should say "an assortment of spacers". I spent hours laying out my tiles and it just did not look right. After investigating my tiles and other things I found the size of the spacers varied from about ,0995" to about .1325". That is more than a 30% variance. Pick and measure these spacers before using.
Date published: 2017-01-08
Rated 2 out of
5
by
TJ from
These spacers are O.K. for the floor, but compress under...These spacers are O.K. for the floor, but compress under the weight of large tile in a wall application. I was doing a shower surround with porcelin 12" by 24" tiles.
Date published: 2017-11-01
Rated 2 out of
5
by
AceH from
Spacers are not all the same size.I'm glad these were a "just in case" add-on because the consistency between thicknesses is disturbing. A lot of them are cut on an angle so they were too thick on one side and too thin on the other. Would have been a lot of digging through the bag if I had really needed these.
Date published: 2016-08-11
Rated 2 out of
5
by
Sean from
I found that many of the spacers are 'close to' 1/8in. but result in a wider spacing. Look at the...I found that many of the spacers are 'close to' 1/8in. but result in a wider spacing. Look at them carefully before using because the way many of them are cut they are bent, misshaped enough that they don't give a 1/8in space between tiles. It is real noticeable when you have a 'good' and 'bad' spacer under a tile - you can see that it is lined up crooked. I've had fewer issues with wider spacers like 3/16in so maybe the 1/8in size is just harder to create uniformly. Maybe there is another manufacturer that does a better job.
Date published: 2018-03-04
