2-in-1 Pneumatic 15.5-Gauge and 16-Gauge Flooring Tool - DWFP12569 - 204334521

2-in-1 Pneumatic 15.5-Gauge and 16-Gauge Flooring Tool - Specifications

Dimensions

Product Depth (in.) 20.551
Product Height (in.) 23.386
Product Width (in.) 3.937

Details

Model number: DWFP12569
Internet number (SKU): 204334521
Price: $234
Brand:
Availability: in stock

Similar products





Description

2-in-1 Pneumatic 15.5-Gauge and 16-Gauge Flooring Tool - Product information

The DEWALT 2-in-1 Pneumatic Flooring Tool drives 15.5-Gauge staples and 16-Gauge L cleat nails from 1-1/2 in. to 2 in. length. This tool features mallet actuated pneumatic driving action. This tool is backed by a DEWALT 3-year limited warranty for added peace of mind.

  • Non-marring, interchangeable base plates for 1/2 in. (12.7 mm) through 3/4 in. (19.1 mm) flooring
  • Includes mallet, oil, wrenches, 1/4 in. (6.4 mm) air fitting with dust cover
  • Ergonomically designed with a longer handle and comfortable rubber grip
  • Lightweight at 10.85 lbs.
  • Lower CFM requirements at 3.7 SCFM
  • 100 fastener magazine capacity
  • 70-100 PSI operating pressure

Product reviews


Rated 5 out of
5
by
from
Great floor nailer, quality Dewalt tool. Worked perfectly, hardly a miss fire, and if it miss f...
Great floor nailer, quality Dewalt tool. Worked perfectly, hardly a miss fire, and if it miss fired it was my mistake. Floor was nice and tight, nice professional look after using this nailer. Great time saver. Highly recommend using this nailer.

Date published: 2018-02-14

Rated 4 out of
5
by
from
above average
works perfect only reason I didnt give it 5 stars is because there is no stability to it. It will fall over if you do not hold on to it.
Date published: 2018-05-21

Rated 5 out of
5
by
from
Freaky 2 in 1 flooring nailer
I bought this a month ago and installed my oak hardwood last week. This’ll is desalt nailer worked flawlessly! Very nice to handle!
Date published: 2018-07-03

Rated 3 out of
5
by
from
Just to be upfront....THIS ITEM IS MADE IN TAIWAN. It is not made in China, however, like most of...
Just to be upfront....THIS ITEM IS MADE IN TAIWAN. It is not made in China, however, like most of the flooring nailers out there, except for the venerable Bostitch MIII and MIII. I own one of the MIII's, and it is a great nailer...except for bamboo, which is what I got this one for.
I am installing over 1000 sq ft of 5/8" bamboo, and the staples were splitting the bamboo, making it tough to get the next board to go over the tongue. I reduced the pressure, but it still was splitting, and I DID shim the base platge to make sure the staples were going in the correct position.
This nailer required FAR less pressure ( perhaps because my MIII is old, and worn). I had to take the pressure down to 70PSI to get it to set the cleats JUST right. I also had to shim the 5/8" baseplate a bit to get it to place the cleats accurately. A bit disappointing. However, once I got these two items taken care of, it has worked quite well.
Durability is still a question, but it DOES have a 7 year warranty.
Date published: 2017-01-07

Rated 5 out of
5
by
from
My every day hardwood nailer.
I use this nailer every day for installing hardwood flooring of all types. It is a great value, and I only have a few complaints. The overall width from front to back is a little too much. It's hard to get in close to the walls, and off the first couple rows. Also, the rack for the cleats could hold them a little better without slipping. Having said that, for the money this is a GREAT flooring nailer. Compared to the standard nailers at twice the cost, I am thinking of getting another one. I use cleats not staples, and this nailer works every single day in a professional capacity. I like it a lot.
Date published: 2014-12-11

Rated 5 out of
5
by
from
I have finished 250 of 1200 square feet using 2 inch cleats. So far no jams and it has worked fl...
I have finished 250 of 1200 square feet using 2 inch cleats. So far no jams and it has worked flawlessly. I am very pleased with this product.
Date published: 2018-03-15

Rated 5 out of
5
by
from
easy to use very light weight
Im very pleased with the purchase of the dewalt nail gun
It did a great job on both bedroom floors.. very easy and light weight ...
Its built well and its one of the best nail guns i have ever used ....
Date published: 2018-03-12

Rated 5 out of
5
by
from
Got it to install kitchen and dinning floor. Only used it for about a week but so far very please...
Got it to install kitchen and dinning floor. Only used it for about a week but so far very pleased with it's performance and ease of use.
Date published: 2018-03-13
Air Tool Type Air Nailer
Compressor/Air Tool Features Fastener Collation
Energy Type Air
Included Oil
Loading type Strip
Maximum Fastener Size 2 in
Minimum Fastener Size 1-1/2 in
Minimum Recommended Air Delivery SCFM @ 90PSI 3.7
Minimum Recommended Operating Pressure (psi) 70
Nail Gauge 16
Nailgun Angle 0
Reconditioned No
Returnable 90-Day
Tools Product Type Air Tool
SKU: DWFP12569
Price: $234.00