Air Tool Type
|
Air Nailer
|
Compressor/Air Tool Features
|
No Additional Features
|
Energy Type
|
Air
|
Included
|
No additional components or accessories are included
|
Loading type
|
Strip
|
Maximum Fastener Size
|
2 in
|
Minimum Fastener Size
|
1-1/2 in
|
Minimum Recommended Air Delivery SCFM @ 90PSI
|
2.2
|
Minimum Recommended Operating Pressure (psi)
|
70
|
Nail Gauge
|
16
|
Nailgun Angle
|
0
|
Reconditioned
|
No
|
Returnable
|
90-Day
|
Tools Product Type
|
Air Tool
|
Model number: PFL618C
Internet number (SKU): 203768644
Price: $149
Brand:
Availability: in stock
Similar products
Description
3-in-1 Flooring Nailer - Product information
The Freeman 3-in-1 Flooring Air Nailer and Stapler shoots both 15.5-Gauge staples and 16-Gauge T cleats and L cleats. The driver blade is made of hardened steel with an aluminum cylinder and high-quality rubber O-rings while the body of the nailer is constructed of durable die-cast aluminum to stand up to daily use. This nailer features 2 interchangeable base plates that provide stability and protect flooring surfaces from scratches. The nailer comes with wrenches, oil, and a rubber mallet.
- 3-in-1 magazine has a capacity of 100 - 120 staples or cleats
- 2 composite, non-marring, interchangeable base plates add stability and protection against scratches to floor surfaces
- Base plates allow you to install 1/2 in. - 3/4 in. nail-down flooring
- Heat-treated, 1-piece hardened steel driver blade with an aluminum cylinder and high-quality rubber O-rings
- Durable die-cast aluminum gun body for dependability
- Shoots cleated nails and staples
- Shoots 15.5-Gauge 1-1/2 in. - 2 in. staples and 16-Gauge 1-1/2 - 2 in. T and L cleats
- Long-reach handle with a padded grip for comfort
- Air filter and anti-dust cap that keeps out debris
- Includes oil, wrenches, and a no-mar white rubber mallet
Product reviews
Rated 5 out of
5
by
MannyM3 from
excellent tool to buy
I was going to rent a this tool but i decided to buy it good price
Date published: 2013-05-14
Rated 5 out of
5
by
Trapper from
Worked PerfectlyI put down 500 sq/ft of Home Legend solid bamboo flooring using the 1/2" foot and 1 1/2" 16 ga L-cleats also the asphalt kraft paper. . No problems and it looks great.
Date published: 2013-12-23
Rated 5 out of
5
by
honeydo from
So far, so good......Not sure how to rate this tool. Have only put down about 200 sq. ft. of 3/4" t&g, oak flooring. So far this nailer has been great. No problems. Doing pre-finished in a bedroom. Takes longer because you have to be more careful with each piece for nice fit. For this price, I wouldn't want to rent for as much as I plan on doing. Came with male air connector that didn't match mine. Changed that and began nailing away.
Date published: 2013-09-26
Rated 5 out of
5
by
Alan from
great nailerNeeded a nailer for 3/4 hardwood floor. Checked all the big box stores and Harbor freight too. Never heard of Freeman Tools but took a chance. Arrived fast. Easy to assemble, instructions straight forward. It is a little heavy. My hardwood is very dense Acacia but nailer worked great at 90 lb pressure on compressor. Great hammer that came with it. Did jam twice on 550 sq ft of flooring but that was due to me not striking nailer hard enough. Easy to clear jam by removing 3 screws. No storage case but good value over all.
Date published: 2015-01-07
Rated 5 out of
5
by
Anonymous from
Great ProductI bought this nailer instead of renting one due to the price and reviews. I was going to need it for some time and renting would have been too expensive. I had looked at other nailers in the store at twice the price but with the reviews I read I thought I would give this one a try. I absolutely love it!! I have only had a couple misfires when installing 800 square feet of flooring and those were my fault. Don't hesitate if considering this nailer. You won't regret it.
Date published: 2015-06-02
Rated 5 out of
5
by
RichM1983 from
Great Product!This nailer worked flawlessly for me. I installed around 400 square feet of 3/4" hardwood and never once had a problem. This product does everything you could ask and takes a beating. I highly recommend you purchase this nailer for your hardwood flooring installation.
Date published: 2013-10-01
Rated 5 out of
5
by
hammerhead from
No problems with my FreemanThis product worked great, only jammed twice on 1100sq ft of flooring and once was because I forgot to oil it before I started.
Mine came with a black mallet instead of the white one shown and it does leave marks. They will rub off.
Date published: 2013-06-11
Rated 5 out of
5
by
Mike from
best valueRental of a similar gun was not cost effective, pricing for this product was well within reason for buying vs renting. 2000 nails into my project and this nailer is great.
Date published: 2014-12-17