| Lifetime Warranty
|
Yes
|
| Manufacturer Warranty
|
This product is manufactured according to exacting quality control standards and is warranted to be free from manufacturing defects. Defective material called to our attention within one year of manufacture will be replaced. No guarantee, expressed or implied, is made regarding the performance of this product since the manner and conditions of application are beyond our control.
|
Model number: 00761123
Internet number (SKU): 203468100
Price: $14
Brand:
Availability: in stock
Similar products
Description
8 oz. Floor Seam Adhesive - Product information
Armstrong S-761 Seam Adhesive, easy as 1-2-3. Use to seal the seams of both residential and commercial vinyl sheet flooring for those large jobs where seaming is required. Single component product, use directly from the bottle, no mixing required. Seals with a strong bond. Easy installation, apply an 1/8 in. bead of adhesive along the seam edge of the flooring material and the subfloor, tuck other side of flooring material into the seam, allowing the adhesive to ooze up to the top of the floor. Easy clean-up, remove excess wet adhesive with a clean, damp cloth.
California residents: see
Proposition 65 information 
- Recommended for use in installation of sheet vinyl when seaming is required for a strong seam bond
- Water based/resin seam adhesive for all sheet vinyl
- Simple application from squeeze bottle, easy clean up of excess wet adhesive with a damp clean cloth
- User can walk on seam after 2 hours; 4-6 hours is full dry time
- VOC content 136g/l
- 8 oz. bottle will do 144 lin. ft.
- Create a strong bond at the seam
- Easy clean up, remove wet adhesive from the surface with a damp cloth
Product reviews
Rated 5 out of
5
by
NEWZOOREVIEW from
This product is a SEAM ADHESIVE. It is meant to stick vinyl down at the seams, including vinyl ti...
This product is a SEAM ADHESIVE. It is meant to stick vinyl down at the seams, including vinyl tile. It works similarly to the big buckets of floor adhesive but is meant for small jobs just at the seams. Use it after you have the vinyl rolled onto the floor over the regular adhesive. It makes a good final bond at the edges to ensure there are no gaps in the adhesive layer. If you need a product to actually seal the seams in your vinyl after the adhesive is set, to fill gaps, hide the seam as much as possible and seal out moisture, then you should use ARMSTRONG S500 or MANNINGTON MHS22. There are other vinyl floor seam sealers made but the two above are good products. Some are epoxy/acrylic (very hard wearing) and others are latex (very convenient and water clean up). This product, Armstrong Floor Adhesive, is not a clear-drying, gap-filling, moisture-sealing seam sealer. If you use it for that it will collect dirt and get dark gray and let moisture leak under your seam eventually. If you are using this to seal seams you might as well just let your regular floor adhesive ooze up through the seam and wipe off the excess. You'll get the same results.
Date published: 2017-05-15
Rated 4 out of
5
by
Jw from
It works great for seams or injecting it for bubbles .It works great for seams or injecting it for bubbles .
Date published: 2018-06-26
Rated 1 out of
5
by
Thomas from
Product does NOT dry clear as stated on the bottle.Product does NOT dry clear as stated on the bottle.
Date published: 2018-06-26
Rated 1 out of
5
by
TmB from
Product arrived gelled up making it useless.Product arrived gelled up making it useless.
Date published: 2018-06-12
Rated 5 out of
5
by
geocarp from
This stuff worked. Followed instructions from a you tube...This stuff worked. Followed instructions from a you tube video called Fix It in 15:00 "Fixing Torn Vinyl Flooring" Episode 158. Unless you knew it was there, you would never know it was repaired.
Date published: 2017-06-13
Rated 5 out of
5
by
Macgyverguy from
Some older flooring had curled next to the shower base. I cleaned up under the curled area, appl...Some older flooring had curled next to the shower base. I cleaned up under the curled area, applied the Seam Adhesive under the area and weighted that section of flooring for a day. The flooring stayed flat and then I caulked the edge with the shower base. The result was like the flooring had just been laid. It worked as I needed it to and much better than the normal flooring adhesive would have.
Date published: 2017-07-04
Rated 5 out of
5
by
David from
Product did a good job holding seams together.
I only...Product did a good job holding seams together.
I only use less than 2 ounces for my job. It will be ended up wasted.
Too bad that they don't offer smaller bottle.
Date published: 2018-01-23
Rated 4 out of
5
by
Mike from
Could use better directions. Need to be sure to get glue under seam well. Otherwise good product.Could use better directions. Need to be sure to get glue under seam well. Otherwise good product.
Date published: 2018-03-20
