| Manufacturer Warranty
|
Lasts up to 3 years with proper care and maintenance. www.invisatread.com, ph# 888.842.3356
|
Model number: IVT128
Internet number (SKU): 203529298
Price: $79
Brand:
Availability: in stock
Similar products
Description
1 Gal. Slip Resistant Treatment for Tile and Stone - Product information
The InvisaTread family of products helps to protect against the risk of slip and fall accidents at home, at work and at play. InvisaTread has been formulated to increase the slip resistance of most tile, stone and mineral surfaces. Slip resistant tile has never been so easy, safe or effective.
- Quick, easy and safe to use
- InvisaTread is not a non slip coating, but rather a safe and effective process that works on most hard surfaces
- Ideal for use on porcelain, ceramic, quarry, honed stone, slate and more
- Use in bathtubs, showers, entryways, walkways, pool areas and kitchens or anywhere there is a stone, tile or mineral surface that is slippery when wet
- Do not use InvisaTread on polished marble
- Use InvisaTread straight from the bottle, do not dilute InvisaTread
Product reviews
Rated 5 out of
5
by
RickL from
After testing various exposure times (6,8,10,12,14,16) on a few spare...
After testing various exposure times (6,8,10,12,14,16) on a few spare pieces of tile, I was skeptical at best, since I could not feel much difference nor see any real sheen change. I even applied a second coat to all the various times, essentially doubling them all, still with no apparent difference. As a final test, I used the 16 minute exposure on some recently installed porcelain tiled steps. Imagine my surprise when I compared the tiles without treatment to the steps and had no issue with slipping where treatment was applied versus the tiles right next to the untreated tiles. There is no visible difference at all but this product does work as suggested. I did no cleaning before due to the tiles being newly installed. The area tested is a low traffic area but plan to tile a front high traffic area with steps and was very concerned about visitors slipping. I now have alleviated that concern and can proceed with that project. I can recommend this product.
Date published: 2018-01-09
Rated 4 out of
5
by
Mikkel from
Works great.I have ceramic tile on the floors in both the kitchen and bathroom. If you get any water on it, it is about like walking on ice. I plan on replacing it sometime in the future, but until I can, this is a great fix. As long as you follow the instructions, you end up with a floor that is safe to walk on, without changing the appearance of the floor. I am not sure how long it will last, but it is still going strong after 6 months.
Installation is easy. You first clean the floor and grout with a good cleaner. I used "Heavy Duty Tile and Grout Cleaner" by the same people, and it worked well. After cleaning and letting it dry, you apply the anti-slip treatment. Once it drys, you clean it again to remove any residue. You can apply more then one coat if you need extra traction. But one coat did it for me.
Date published: 2016-05-03
Rated 5 out of
5
by
Anonymous from
Works very well!This is a 3 step process and is very easy to apply. First you must clean and rinse with the tile and grout traction cleaner, then apply the slip resistant treatment and the last step is the tile and grout cleaner again, which neutralizes the slip resistant coating. You can use a sprayer or a squeegee to apply. I used a squeegee and it was very easy. It is a bit time consuming but the results are well worth it. My tiles were very slippery especially if I came in from the rain. This process makes them absolutely safe. You will not see any difference in the look of the tiles which is exactly what I wanted. I am very happy and highly recommend this product.
Date published: 2016-03-01
Rated 5 out of
5
by
ChrisE from
If you have a slippery when wet issue, this is the product to use! Great for ceramic/porcelain t...If you have a slippery when wet issue, this is the product to use! Great for ceramic/porcelain tile floors in bathrooms! Easy to use, short use time, completely treat a bathroom floor in 30-40 minutes. Micro-etching increases the amount of friction between your feet and the tile and greatly reduces the chance of slips and falls. If you choose to use this, make sure you also get the TractionWash Heavy Duty Tile and Grout Cleaner, for pre-treatment cleaning and post-treatment rinsing.
Date published: 2016-11-08
Rated 5 out of
5
by
HomeDepotCustomer from
Very effective treatment for slippery areasAs we get older, one has to consider safety around the home, and this is a very effective means to making home safer. We have this stamped concrete around the front of our home, and last year, I had a bad fall on the ice just at the front door. So close, and yet, so far. So this year we have used this InvisaTread treatment everywhere we might be liable to slip! Good idea for a lot of people. It's not something that takes away from the beauty of the stamped concrete, either, you'd never even know it was there, so don't worry about the colors changing or anything. I'd recommend it for any home.
Date published: 2015-10-11
Rated 4 out of
5
by
HomeDepotCustomer from
4 Star ReviewRating provided by a verified purchaser
Date published: 2018-02-07
Rated 5 out of
5
by
reb177 from
Works well, used it on porcelain tubI wanted to get rid of some anti-slip decals on the floor of my tub, and since the product states that it will work on porcelain, I decided to try this on the tub floor. After removing the decals (no easy task) I applied the InvisaTread with a sponge. Since my tub is white I didn't really notice the 'white residue' described in the instructions. I'm pleased to report that the InvisaTread works as described and made the tub floor slip-resistant.
Date published: 2016-04-16
Rated 5 out of
5
by
Joco from
Add slip resistance to ADA rampsWe applied Stonewalled Sealer to a new concrete ADA ramp as added slip protection, Alway looking to increase sales for my company, Followed the easy instructions on the side label, Applied the recommended InvisaGuard sealer for concrete. The HOA was very happy with the finished product and want me to give them proposals to apply to other area's. Yes I would recommend and have already
Date published: 2015-10-16
