10.1 oz. Repair Adhesive - FIX010 - 204775851

10.1 oz. Repair Adhesive - Specifications

Dimensions

Product Width (in.) 2

Details

Color Family
Clear
Commercial / Residential Commercial / Residential
Floor/wall use Floor
Flooring Material Features Crack resistant,Mold/mildew resistant,No mixing required,Rapid setting,Self-Leveling,Water based
Flooring Product Type Tile & Stone Adhesive
Indoor/Outdoor Indoor/Outdoor
Product Form Liquid
Product Weight (lb.)
1lb
Product type Adhesive
Recommended Surfaces Ceramic,Multi-Surface,Stone,Tile,Woodwork
Returnable 90-Day

Warranty / Certifications

Model number: FIX010
Internet number (SKU): 204775851
Price: $9
Brand:
Availability: in stock

Similar products





Description

10.1 oz. Repair Adhesive - Product information

Fix-A-Floor is an extra strength repair adhesive customized for the specific use of re-bonding loose and hollow tile, marble, stone and wood flooring without removing or replacing. It's fast, easy and affordable. DIY - just drill and fill.

  • Elastomeric properties allow for the adhesive to never crack and loose its bond
  • Predrilled 1/8 in. tip allows for filling small holes in narrow grout lines, marble and wood flooring
  • Additional cut lines on tip marked for 3/16 in. or 1/4 in. or any size as needed
  • Dries within 24 hours
  • Easy clean up with sponge and water, dries clear
  • Guaranteed for the life of your floor
  • Works great on small or large problem areas
  • Non-toxic, non-flammable and eco-friendly
  • Great DIY project, see how-to videos
  • Designed to work with a standard caulk gun
  • Fix-A-Floor repair adhesive has super bond strength of 130-135 psi
  • Fix-A-Floor is very fluid: 1800-2700 mPa.s 25°C/77°F
  • Keep tubes from freezing before use
  • Please call 1-800-774-5982 if you need assistance

Product reviews


Rated 4 out of
5
by
from
Product did what I hoped it would do for two...
Product did what I hoped it would do for two different applications. It stabilized red oak steps that were installed over a concrete step base. I was also able to stabilize wood looking plank porcelain floor tiles after they were installed. Only caution would be that a little goes a long way.

Date published: 2018-05-23

Rated 5 out of
5
by
from
messy but good
Used on a loose tile that made a crutchy sound when stepping on it. I cleaned as much grout out around the tile as I could. I used an 1/8th drill bit and drilled holes all around the tile. I didnt do this as discribed in the video or instructions. I made numerous holes. I inspected the holes to ensure i could see a gap under the tile. Once i did i cut the tip and insterted into the holes and squeezed till it came out a different hole. Repeat till complete. I used a 70lb floor safe and a five gallon bucket for weight and let it sit for two hours. After that i re-grouted the tile and let it dry. I am super impressed that this worked. I have an uneven floor that is being a pain. Lessons learned; this stuff is runny and messy. It will get all over so be prepared for the cleanup before you start. Do not squeeze the gun trigger to hard out it will spurt out the back. I was lucky as that happened at the last hole. Yes it looks like elmers glue but it will work. Drill as big of a hole as you can try to get the nozzle to fit snug in the hole. It will run all over everything so be prepared. Other than that its been about two weeks and the tile hasn’t given any signs of being loose or not solid. Very impressed!!
Date published: 2018-06-10

Rated 5 out of
5
by
from
Improved packaging...It really works, no waste!!!
I never write reviews, but I had to review this product. I am a big DIYer and am big on saving a dollar, so when when my son’s bathroom redo revealed several loose tiles I became furious because I had not budgeted to replace flooring...to the internet I went! My research on YouTube uncovered this hidden treasure. I was skeptical but I figure it was worth a try. Most of the grout around the loose tiles had cracked so instead of drilling holes, I just used a grout remover and removed the grout around the loose tiles and inserted the product in the space between the tiles. Worked like a charm! I was fearful of wasting product based off earlier reviews, but it looks like the manufacturers heard the concerns and improved the packaging. I had ZERO waste, resulting in me needing only one tube to fill in 6 12x12 tiles. Tiles are rock solid, no moving or shifting!! Thank goodness for this product...saved me $$$$!!!!
Date published: 2018-03-25

Rated 2 out of
5
by
from
Doesn't always fill hollow areas
I am in the void fill and slab jacking business. So I knew what I was looking to fill the hollow sounding tiles. Tile stores did not know of a product that would fill hoIlow sounding areas. I found this product on line and figured I would give it a try. The tiles sounded hollow but had not cracked or come loose. I followed the directions exactly for the 1st attempt on about 15 square feet. I drilled the 1/8" holes very carefully. Used the equivalent of one 10.1 oz. tubes. Used constant pressure and tight grip on the caulking gun. I actually broke one tube because of the amount of pressure from the caulk gun. At end of job only about half of the area did not sound hollow. So I decided to try again on the remaining half of the area. Again followed the directions exactly. Used less than one tube on about 7 square feet.
Bottom line is some tiles won't take the adhesive even when they sound hollow. If you don't have a supply of replacement tiles, i suggest you give this product a try but don't expect a lot.
Date published: 2014-04-13

Rated 4 out of
5
by
from
After installing 9-1/2 floor tiles we noticed one was loose. I followed the directions and drille...
After installing 9-1/2 floor tiles we noticed one was loose. I followed the directions and drilled holes in grout and squeezed some goo in. Waited a day and it seems like it’s fixed! Need to simply fill the grout holes and looks like we’re good. Incidentally I read the reviews here before trying and noted some folks didn’t get good results. Certainly worth a try. Worked well me.
Date published: 2018-05-15

Rated 5 out of
5
by
from
We got this to repair a broken tile we had on our steps (we had all the pieces but the color and ...
We got this to repair a broken tile we had on our steps (we had all the pieces but the color and style had been discontinued so we couldn’t just replace the tile without it looking really wierd or replacing all the steps and we really didn’t want todo that!) fix afloor
worked great I will definitely recommend and will use it again!!
Date published: 2018-05-11

Rated 5 out of
5
by
from
I actually used this to re-adhere floor tiles that were not properly mortared. It's been about a ...
I actually used this to re-adhere floor tiles that were not properly mortared. It's been about a week and the results so far are exactly as I had hoped. No more shakey or loose tiles, everything feels sturdy and solid. Very expensive but VERY easy and quick if you're in a binde. Re-grouting, of course, was also necessary.
Date published: 2018-06-19

Rated 5 out of
5
by
from
Economical way to re-glue loose tiles
The ceramic tiles in my house are about 15 years old. Several of them had become detached from the mastic and sounded hollow. A few had cracked. Following the product instructions and using a YouTube video for advice/method, I drilled the holes and injected Fix-a-floor. It's a liquid like heavy cream, and not a caulk or mastic. It was easy to inject, though when you go from one drilled hole to the next, move quickly so you don't waste much. I found that the repair uses more product than I anticipated. But now I understand how the process works, so that's normal. When the space is really full, and the Fix-a-floor starts coming out of other holes, you know you've got it!! Each tube repaired only 2-3 tiles. But, since I did not have replacement tiles, Fix-a-floor was more economical than the removal of all old tiles, preparing the floor, buying new tiles and installing. The chore was quite easy, and the clean-up was too. Order more than you might need and return the unused tubes.
Date published: 2014-07-15
Manufacturer Warranty “Fix-A-Floor Worldwide, Inc. is 100% certain you are going to love this product! Fix-A-Floor wants to make sure that you are completely happy with our product and your experience. This is why we offer a full, no fuss 100% money back guarantee or product replacement if proven defective. Made in the USA! Thank you for choosing Fix-A-Floor!”
SKU: FIX010
Price: $9.00