| Manufacturer Warranty
|
Limited Lifetime Residential Warranty
|
Model number: MG001288
Internet number (SKU): 300700963
Price: $29
Brand:
Availability: in stock
Similar products
Description
Vermont Maple 3/4 in. Thick x 2-1/8 in. Wide x 78-3/4 in. Length Laminate 4-in-1 Molding - Product information
Pergo 4-in-1 Molding provides everything you need to complete your laminate flooring installation in 1 single kit. This patented innovation allows assembly of 4 different moldings from a single product. Join laminate flooring with a similar height hard surface floor with the T-molding. Use in doorways with a width of 4 ft. or less or in rooms 66 ft. or larger. To transition laminate flooring to a carpeted floor use the carpet transition. Use the hard surface reducer to transition laminate flooring to a lower, hard surface floor, such as vinyl, wood or tile. Finish your laminate flooring installation at sliding doors, fireplaces or other fixed edges with end molding.
California residents: see
Proposition 65 information 
- Pergo 4-in-1 Laminate Floor Molding
- All moldings in kit are 6-1/2 ft. in length
- T-mold and carpet reducer measure 1.75 in wide
- Hard surface reducer measures 2 in wide
- 4-in-1 molding is color coordinated to Pergo laminate decors
- Can be used with flooring up to 16mm thick
- Design includes t-molding, carpet transition, hard surface reducer and end molding
- T-molding joins two hard surfaces of similar heights
- Carpet transition joins hard surface to carpeted surface
- Hard surface reducer joins two hard surfaces of differing heights
- End molding provides a solution at fixed edges
- No painting or staining necessary
- Appropriate Grade for Installation: Below Grade, On Grade and Above Grade
- Can be installed over smooth, flat, dry surfaces: concrete, ceramic tile, vinyl and wood
- Residential use only
- Limited lifetime residential warranty
- All online orders for this item ship via parcel ground and may arrive in multiple boxes
- Actual item color may vary from device screen representation
Product reviews
Rated 5 out of
5
by
Jean from
This 4-in-1 Laminate Molding kit makes it easer to install...
This 4-in-1 Laminate Molding kit makes it easer to install your floor at the door ways that have a different hight.
Date published: 2018-05-24
Rated 3 out of
5
by
Dennis from
The match between the floor and the molding is way...The match between the floor and the molding is way off.
Date published: 2018-07-04
Rated 5 out of
5
by
Fatu from
Exactly what I needed....Exactly what I needed.
Date published: 2018-06-12
Rated 1 out of
5
by
Craig from
product looks good but the fiber board construction was weak.
...product looks good but the fiber board construction was weak.
i did not need the whole length and was able to use the leftover piece to replace the first piece that broke during installation.
NOW i don"t have any left for the next phase of this project and will be forced to buy another.
Date published: 2018-02-06
Rated 4 out of
5
by
CM from
The wood grain matched nicely, the instructions were clear, the...The wood grain matched nicely, the instructions were clear, the product made nice transitions from Pergo to carpet. It was hard to work with, broke easily and the length made for excessive waste after cutting standard door dimensions. Overall, it was the best product for the job.
Date published: 2018-03-06
Rated 3 out of
5
by
HomeDepotCustomer from
Easy to brake, needs proper installation......Easy to brake, needs proper installation...
Date published: 2018-03-13
Rated 1 out of
5
by
Jake from
We did aprox. 800 sq/ft of the Vermont Maple on our first floor. The Laminate flooring looks amaz...We did aprox. 800 sq/ft of the Vermont Maple on our first floor. The Laminate flooring looks amazing! The problem I have is with the "Vermont Maple" 4-in-1 Molding. The 4-in-1 Molding is NOT the same color as the Vermont Maple flooring! It is much lighter in color and has no grain markings! In my opinion, it looks horrible!! I called Home Depot thinking they sent me the wrong product, but after they sent me new 4-in-1's, it turns out that is just the color that comes for Vermont Maple.
If I had to do it over, I would try to find another company who makes a T-molding or just go with out any transitions.
I would recommend others to do the same.
-Jake
Date published: 2017-04-18
Rated 4 out of
5
by
Adam from
Easy to use and makes a nice low profile transition....Easy to use and makes a nice low profile transition.
Date published: 2017-11-09
